V&V Benchmark Problem #2 – Single-Jet Computational Fluid Dynamics (CFD) Numeric Model Validation
The ASME V&V 30 Subcommittee on Verification and Validation in Computational Nuclear System Thermal Fluids Behavior is supporting a series of verification and validation (V&V) benchmark problems designed to study the scope and key ingredients of the V&V 30 Subcommittee's charter. This will be achieved by means of the following:
- New, high-quality, state-of-the-art validation data sets obtained using a scaled down experimental facility and instruments with measurement uncertainties estimated using accepted ASME practices for experimental uncertainty (ASME PTC 19.1 Test Uncertainty)
- A stepwise, progressive approach characterized by focusing on each key ingredient individually
The second V&V benchmark problem, Single-Jet Computational Fluid Dynamics (CFD) Numeric Model Validation, was first introduced at the 2019 V&V Symposium and involves simulating a single-jet and plume for single-jet experiments at different Reynolds numbers. During the 2019 V&V Symposium and 2020 V&V Symposium, the focus was on isothermal single jets.
As a new addition to the 2021 V&V Symposium, submissions are open for the heated (non-isothermal) single-jet experiment. Participants may choose to make submissions to the heated single-jet experiment and/or isothermal single jet experiment.
The second V&V benchmark problem, Single-Jet Computational Fluid Dynamics (CFD) Numeric Model Validation, was first introduced at the 2019 V&V Symposium and involves simulating a single-jet and plume for single-jet experiments at different Reynolds numbers. During the 2019 V&V Symposium and 2020 V&V Symposium, the focus was on isothermal single jets.
As a new addition to the 2021 V&V Symposium, submissions are open for the heated (non-isothermal) single-jet experiment. Participants may choose to make submissions to the heated single-jet experiment and/or isothermal single jet experiment.
The experimental data set can be found at the Thermal-Hydraulic Research Laboratory website. At the bottom of the website, you can select Download Benchmark Package to access the following items:
- Data for the isothermal and non-isothermal single jet experiments
- Benchmark problem description, including test geometry and boundary conditions
- Technical publication on the benchmark problem
If you would like to participate in the benchmark problem session at the 2021 V&V Symposium, please submit your technical presentation abstract for the Challenge Problem Workshops and Panel Sessions track by February 28, 2021.
If you have any questions and/or are interested in participating, please email the ASME V&V 30 Subcommittee Staff Secretary, Michelle Pagano, at PaganoM@asme.org.
The first V&V benchmark problem, Twin-Jet Computational Fluid Dynamics (CFD) Numerical Model, which ran from the 2016 V&V Symposium to the 2018 V&V Symposium, is now closed and a technical report is being written on the results.
Objective of the Second Problem: Using a select set of data from the single-jet experiments (provided by the ASME and organizers), apply the V&V practices necessary to ensure an appropriately validated computational solution is obtained. The V&V 30 Subcommittee encourages participants from the CFD community to use whatever V&V practices they would normally use in the context of preparing a document which they might submit to the U.S. Nuclear Regulatory Commission for review.
Protocol for Participating in the Second Problem: The participating organizations or individuals who would like to take part in the benchmark exercise are requested to perform their V&V assessment using the standard protocol and procedures accepted by their engineering communities and sponsoring organizations.
It is noted that this benchmark effort is not intended as a competition among companies or individuals, but rather is intended as a demonstration of the state of the practice in using and applying computational tools to support U.S. Nuclear Regulatory Commission or other regulatory reviews.
The outcomes of this second benchmark effort include lessons learned, review of V&V methods, and understanding of the effectiveness of V&V methods to support modeling and simulation reviews. The results of the various participants will be summarized and compared in a subsequent report.