Skip to content
Program

Women in Engineering

Women in Engineering & Early Career Discussion and Reception

Building Your Professional Voice, Network, and Impact


Panel/Roundtable: ASME – Women in Engineering & Early Career – Building Your Professional Voice, Network, and Impact
Time: Wednesday, November 11, 2026, at 6:00-7:30
Location: Room 211 - West Hall


Program Description

Engineering careers are shaped not only by technical expertise, but also by the ability to communicate ideas, build meaningful professional relationships, and recognize opportunities for growth. This session begins with a dynamic panel featuring women leaders and professionals across career stages and sectors who will share their experiences and perspectives on developing a professional voice, building networks, navigating career transitions, and creating impact in engineering. Following the panel, participants will join themed roundtable discussions to dive deeper, ask questions, exchange experiences, and gain practical insights on mentorship and sponsorship, professional visibility, networking, leadership development, and career growth. The session will conclude with an informal networking opportunity, allowing participants to continue conversations initiated during the panel and roundtables and strengthen connections across career stages.

Whether you are entering the profession, navigating an early-career transition, or advancing toward greater technical and leadership responsibilities, this program will provide opportunities to learn from diverse career experiences, strengthen professional connections, and explore pathways for continued growth and impact.


Program Overview

  • Welcome & Kickoff Message from ASME President
  • Panelist Introductions
  • Guided Questions & Panel Discussion
  • Themed Roundtable / Interactive Discussions
  • Closing Remarks
  • Networking Reception

Event Leadership

The following ASME leaders will guide the panel discussion, sharing their professional journeys and insights on career development, leadership, and engagement within ASME:

Dr. Sarvenaz Sobhansarbandi

Dr. Sarvenaz Sobhansarbandi (Panel Moderator) is an Associate Professor of Mechanical Engineering and Director of the Advanced Renewable/Thermal Energy (ART-E) Laboratory at California State University, Sacramento (CSUS). Before joining CSUS, she served as an Associate Professor of Mechanical Engineering at the University of Missouri-Kansas City. She earned her Ph.D. in Mechanical Engineering from the University of Texas at Dallas in 2017. Dr. Sobhansarbandi’s research focuses on renewable and solar energy systems, computational fluid dynamics, and hybrid numerical modeling, with an emphasis on thermal and energy analysis as well as the design and optimization of advanced thermal management systems. She is an active member of ASME, ASHRAE, and SWE. Within ASME, Dr. Sobhansarbandi serves as an Executive Committee Member of the ASME Power Division (2021–present), Chair of the ASME Power Symposium (2025–2026), Technical Program Chair of the ASME 2026 Energy Sustainability Conference, and Chair of the ASME Advanced Energy System Division (AESD) Renewable Energy and Energy Conversion Technical Committee (2025–2026). Dr. Sobhansarbandi has served as the PI on multiple funded projects supported by federal and national organizations, such as the US Department of Transportation (DOT). She has also served as Guest Editor for two Special Issues of Energies: Optimized Thermal Energy Storage Technology Based on Phase Change Material and Recent Advances in Renewable Energy.

 

Dr. Janis Terpenny

Dr. Janis Terpenny (Panelist) is the 145th President of the American Society of Mechanical Engineers (ASME). An ASME Fellow and active volunteer for more than 20 years, she also currently serves as a program director at the National Science Foundation (NSF), on temporary assignment from George Mason University, where she is a professor of systems engineering and operations research, as well as mechanical engineering. Previously, Dr. Terpenny served as program director for the Division of Undergraduate Education at the NSF, dean of engineering at the University of Tennessee and department head of industrial and manufacturing engineering at Penn State University and at Iowa State University. She was co-founder and director of the Center for e-Design, an NSF IUCRC center comprised of seven universities and over 30 industry members. Dr. Terpenny has nine years of industry work experience with GE, including a two-year corporate management program. She founded, and for 10 years chaired or co-chaired, the Broadening Participation Committee (BPart) for the ASME Design Engineering Division. Dr. Terpenny served as the first associate editor of design education for the ASME Journal of Mechanical Design. Dr. Terpenny is also a Fellow and member of ASEE and IISE and has received numerous awards for excellence in teaching, in research, and for service.

 

Susan Ipri-Brown

Susan Ipri-Brown (Panelist) is the principal consultant at Empowerment Levers, specializing in the strategic implementation of education programs. A Fellow of the American Society of Mechanical Engineers, she served as its 143rd President. At Hope College, Susan was the Associate Dean for Educational Outreach and an Associate Professor of Engineering Instruction, where she led the expansion of a camp program into a college-wide educational outreach office supported by numerous national education grants and broad stakeholder engagement. She has also held positions with the National Institute of Standards and Technology's Office of Advanced Manufacturing, the Northwestern University Office of STEM Education Partnerships, several North Carolina school districts, Delphi Automotive Systems, and the Michigan Legislative Service Bureau. Susan earned her bachelor's and master's degrees in mechanical engineering and is currently pursuing her Ed.D.

 

Karen Horting, MBA, CAE

Karen Horting, MBA, CAE (Panelist) is the executive director and CEO for the Society of Women Engineers, a position she has held since Dec. 31, 2013. SWE is a nearly 45,000-member global professional organization for women and allies in engineering. Horting has more than 25 years of experience in association management. Horting came to SWE in March 2004 from the New York Academy of Sciences, where she served as director of strategic planning. Before her role with NYAS, Horting worked for the American Association for the Advancement of Science (AAAS), managing both marketing and fund development on a global level for Science's Next Wave. Prior to her association work, she spent 10 years in the paint industry. Horting holds a B.S. in biology from Northern Illinois University and an MBA from Johns Hopkins University. She currently serves on the FIRST Robotics Board of Directors, the STEM Ed Coalition Board of Directors, and the Johns Hopkins Carey School of Business Dean's Alumni Board (DAB). In 2019, she was awarded the Inspiring Leader Award from the Association Forum. In 2024, she was named to Forbes 50 Over 50 list for Innovation. And in 2026, she received the Johns Hopkins Alumni Award for Global Achievement.

 

Dr. Muhammad Jahan

Dr. Muhammad Jahan (Roundtable Moderator) is an Associate Professor in the Mechanical and Manufacturing Engineering (MME) department at Miami University. Dr. Jahan received his BS and PhD in Mechanical Engineering from Bangladesh University of Engineering and Technology (BUET) and National University of Singapore (NUS) in 2004 and 2010, respectively. Dr. Jahan then worked at Makino Asia Pte Ltd, a well-known manufacturer of CNC milling and EDM machine tools, for about a year. Prior to starting his tenure track Assistant Professor position in 2012, he worked as a Postdoctoral Research Associate at the Institute of Nanoscience and Nanoengineering at the University of Arkansas. He joined Miami University in 2016 after serving 4 years at the Western Kentucky University (WKU). Dr. Jahan also served as the Graduate Program Director in the MME department from January, 2020 to July, 2023. Dr. Jahan’s research interests are in the areas of non-traditional manufacturing processes, sustainable manufacturing, post-processing of additively manufactured parts, hybrid additive-subtractive manufacturing, and micro and mano manufacturing processes. Dr. Jahan’s research has been supported by the National Science Foundation (NSF), NSF-KY EPSCoR, Ohio Department of Higher Education (ODHE), Ohio Space Grant Consortium (OSGC), LAM Research Corporation, M K Morse Company, Bullen Ultrasonics, Nazarbayev University, Western Kentucky University, and Miami University. Dr. Jahan has received a total of over $1.77M grants as PI and co-PI. He has published over 130 journal and conference articles, and 20 book chapters. He received four ‘Best Paper Award’s including the ‘Outstanding Paper Award’ from the Society of Manufacturing Engineers (SME) at the prestigious North American Manufacturing Research Conference in June, 2012 (NAMRC 2012). Dr. Jahan is an active member of the American Society of Mechanical Engineers (ASME), the Society of Manufacturing Engineers (SME), and the American Society for Engineering Education (ASEE). He served in the Technical and Scientific Committees of ASME and SME in the past. He served as the Track Co-Chair (2019-2021) and Track Chair (2022) for the "Advanced Manufacturing Track" of the ASME International Mechanical Engineering Congress & Exposition (IMECE). He is currently serving as the Track Co-Chair of the "Material Removal Track" of the SME (2020 – 2024). He is also serving as an Associate Editor of the Prestigious SME Journal of Manufacturing Processes (2022-2025).

 

André Teixeira

André Teixeira (Roundtable Moderator) is Director of Distributed Energy Systems – Iberia at EDP, leading teams across Portugal and Spain in sales engineering, technical-commercial development, customer management, revenue assurance and business development. His work spans solar PV, battery storage, electric mobility and broader distributed energy solutions for B2B customers.

With more than 11 years of experience in energy, engineering and industrial operations, André has built his career at the intersection of technology, commercial strategy and operational execution. He currently serves as Chair of the ASME Power Division, where he has held several leadership roles since 2014, and is also a member of the Future Energy Leaders Portugal 2026 cohort. He is particularly interested in distributed energy, energy storage, industrial electrification, engineering leadership and the future of power systems.

 

Dr. Judith Ann Bamberger

Dr. Judith Ann Bamberger (Panelist) is a Senior Research Engineer at Pacific Northwest National Laboratory. Judith is an ASME Fellow and Professional Engineer. Her research focus is specializing in slurry mixing, transport, and solids separations. Most recently she has investigated and applied mesofluidics to separation of slurries and deformable particles. Characterizing unsteady mixing she developed and applied unique ultrasonic instrumentation for characterizing slurries and mixing in real time in situ especially for characterizing unsteady pulse-jet mixing system performance. At ASME Dr. Bamberger is past chair of the ASME Fluids Engineering Division 2020-2021 and served on the executive committee through 2024. Currently she is vice chair of the FED Graduate Student Scholar Committee, chair of the Ralph Coats Roe Medal Committee, and past chair of the Henry R. Worthington Pump Medal. She's been active mentoring at ASME in VOLT. On the other side of the organization she’s been a member-at-large for Students & Early Career Development Board, Northwest Region Lead (2019-2022), and District D Leader (2012-2015). She actively publishes and presents at IMECE and FEDSM.

 

Tina Toburen, P.E.

Tina Toburen, P.E. (Roundtable Moderator) is an independent consultant with more than 30 years of industry experience specializing in testing and monitoring the thermal performance of power generation equipment. She holds both a BSME and MSME from the University of Washington in Seattle, WA. Her consulting firm, T2E3, Inc. provides performance testing services (capacity and efficiency) for gas-turbine based power plants, and also develops custom software, reports and training materials to support long-term efficiency improvements for power plant operations. Tina is a past chair of the ASME Power Division also serves on many ASME Performance Test Code committees.

 

 

Dr. Donna Post Guillen

Dr. Donna Post Guillen (Roundtable Moderator) is a Distinguished Researcher at Idaho National Laboratory (INL), where she leads the Materials Performance and Modeling Group. She has more than 40 years of research and engineering experience, including 32 years at INL. She began her career in aerospace and defense, where she worked on aerobrakes for a Mars lander concept. At INL, she has led research on nuclear materials, waste heat recovery, and advanced manufacturing. Her work combines computational fluid dynamics and heat transfer modeling with the design and additive manufacturing of components for energy systems. Dr. Guillen serves on technical committees and organizes symposia for ASME and other professional societies. She has mentored more than 60 postdoctoral researchers, students, and interns and received a 2026 Mentor of the Year Award from the U.S. Department of Energy’s Workforce Development for Teachers and Scientists program.

 

Andrew Rister

Andrew Rister (Roundtable Moderator) is a Project Manager for Duke Energy Indiana. He has nearly 20 years of experience working at Gibson Generating Station, a 3,145MW fossil fueled plant in Indiana. He is responsible for all aspects of project management, from scope development, cost estimating, engineering design, equipment specification, construction, start-up & commissioning, and project turnover. He specializes in Balance of Plant equipment and has successfully run multi-million dollar projects involving steam, water, compressed air, chemical, and material handling equipment & systems. He specializes in heat exchangers and condensers and is a member of the ASME Power Division’s Heat Exchanger Committee. He worked as a co-op for Duke Energy while in college and is active in mentoring and supporting current Duke Energy engineering co-op students. He holds of Batchelor of Science in Mechanical Engineering from the University of Evansville and is a licensed Professional Engineer in the state of Indiana. He is the 2010 recipient of ASME’s Arthur L. Williston Medal.

 

Leila C. Aboharb

Leila C. Aboharb (Roundtable Moderator) is a Mechanical System Engineer at Cornell University’s Laboratory for Accelerator-based Sciences and Education (CLASSE) and the recipient of the 2026 ASME Lakshmi Singh Early Career Leadership Award. At Cornell, she helps maintain a particle accelerator and develops equipment for NSF-funded facility expansions. She began her career as a vehicle engineer at STV Inc., where she supported public transit agencies and helped commission passenger railcars for Amtrak’s long-distance fleet. She earned her B.S. in Mechanical Engineering and Mechanics from Drexel University.

Leila has served ASME as an ECLIPSE intern, Vice Chair of the Committee on Organization and Rules, and New Programs Chair of the Student Programming Committee. She also supports the Free Science Workshop, an Ithaca nonprofit that brings hands-on science to rural and underserved communities.

 

Clare Bruff

Clare Bruff (Roundtable Moderator) is Director, Volunteer Engagement and Diversity at ASME, where she provides staff leadership for several volunteer groups, including the Inclusion Strategy Committee, the Volunteer Orientation and Leadership Training Committee, and the History & Heritage Committee, among others. She joined ASME in 2013. Previously, she served as Director, Field Support, for the American Lung Association. Clare holds a B.A. in Africana Studies and English from Rutgers University and a Master’s of Public Administration from Baruch College, City University of New York. She lives in Brooklyn, New York.